Model for protective visor

Wisify, in collaboration with the team of the Open Science Platform of the Municipality of Figueira de Castelo Rodrigo, made adaptations to the printing model of visors of the Maker Movement – Portugal, in order to reduce the printing time of each unit (from 1h40 to 32 minutes).


At this moment, all help is little, and as such, we call on our community to join us! If you have technical skills to collaborate on the project or if you have a 3D printer available, register as a maker or find one near you: https://makers.void.pt/

Visor (1)

STL file of a visor structure. It can be printed in 32 minutes.
Just download and import the file into the slicer you use.

Visors (2)

Two-frame STL file for visor. They can be printed in 64 minutes.
Just download and import the file into the slicer you use.

Flap

STL file of a docking flap for these visors. It can be printed in 22 minutes.
Just download and import the file into the slicer you use.

Covered visor (1)

STL file of a covered visor structure.
Just download and import the file into the slicer you use.

Covered visors (2)

Two-frame STL file for visor.
Just download and import the file into the slicer you use.

Crown visor

STL file of a visor structure.
Just download and import the file into the slicer you use.

Visor (1)

G-code file of the Ender-3 printer part.
Simply download the file and copy it to the micro SD card to put in the printer.

Visors (2)

G-code file of the Ender-3 printer part.
Simply download the file and copy it to the micro SD card to put in the printer.
G-Code, New Code

Flap

G-code file of the Ender-3 printer part.
Simply download the file and copy it to the micro SD card to put in the printer.
1x G-Code

NOTE: Clicking to download the G-Code will open the G-Code in text. Right-click the text and save as “save as” by removing the “.txt” leaving only the “.gcode”

Acetate assembly

Assembly instructions for an A4 acetate that should ideally have a thickness of 300 microns. The spacing between holes is 80 mm.

Assembly video and resistance test

Contact us
close slider